Constant Wattage Heating Cable 4-1CT

Chromalox CZH Cable is a multi-purpose heating cable designed for commercial pipe tracing, embedded floor warming, and frost heave prevention. Chromalox’s CZH Cable is constructed of a parallel heating core that produces uniform thermal output over its entire length. It can be easily cut to length, spliced, tee to more easily follow piping networks.

NOTE: A single quantity purchase equals 1ft of cable. Adding multiple quantity of the same cable will add to the overall length of the product. For example: quantity of 10 = 10ft long cable.

NAME	Constant Wattage Heating Cable ...	APPROX. SIZE	0.300in W x 0.250in H / 7.620mm W x 6.35mm H
Part#	390432	PROCESS TEMP MAINTENANCE	325ºF/163ºC
Agency Approval	CSA	MAXIMUM CONT TEMP, POWER OFF	325ºF/163ºC
VOLTS	120V	WATTS/FT	4W/FT
CABLE CONSTRUCTION	Twin 12 AWG Copper Buss Wire	HEATING CABLE LENGTH	Sold per Linear Foot, 1FT =1QTY
COLOR	Metallic	CONDUCTOR MATERIAL	Copper
MINIMUM BEND RADIUS	1.250in / 31.750mm

Applications

• Uniform Thermal Output, Low Energy Cost
• For Use on Metallic Pipes (Consult factory for Use on Plastic Pipes)
• Industrial Freeze Protection Application
• Pipe Freeze Protection
• Flow Maintenance

FEATURES

• Durable, non-aging fluoropolymer jacket ensures long service life and can be used in some hostile environments

• Flexible, easy to install on most equipment and delivers long-term reliable performance

• Accurate temperature, reliable electric heat that can be consistently controlled and easily monitored

• Parallel circuitry allows cut-to-length

• Low profile, uses standard size thermal insulation on piping and process equipment

CONSTRUCTIONS

• Twin 12 AWG Copper Buss Wire - Provide reliable electrical current capability

• FEP Insulation Jacket – Electrically insulates buss wires

• Pairing Jacket – Secures two buss wires together and provides wrapping surface for Nichrome wire

• Nickel Chromium Wire – Heating component of cable

• FEP Insulation – Rugged outer sheath protects heating cable, assures longer service life

• Tinned Copper Braid – Plated copper braid increases robust construction, provides ground path and provides additional protection in any location

• FEP Overjacket – Fluoropolymer overjacket, over the braid, provides protection from most aqueous and chemically corrosive solutions

WARNING - A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30mA is recommended to minimize nuisance tripping

Approvals:

CSA Certified for ordinary areas