Self-Regulating Low Temp Heating Cable 3-2CT

Chromalox SRL self-regulating heating cable provides safe, reliable heat tracing for freeze protection of pipes, valves, tanks and similar applications. Constructed of industrial grade 16 AWG buss wire with a tinned copper braid and optional overjacketing, SRL ensures operating integrity in Div. 2 hazardous environments as well as certain corrosive industrial environments. SRL heating cable has a maximum maintenance temperature rating of 150°F (65°C).

With Fluoropolymner corrosion resistant overjacket over braid for hostile/corrosive environments

NOTE: A single quantity purchase equals 1ft of cable. Adding multiple quantity of the same cable will add to the overall length of the product. For example: quantity of 10 = 10ft long cable.

NAME	Self regulating Low Temp Heating Cable ...	APPROX. SIZE	0.375in W x 0.125in H / 9.525mm W x 3.125mm H
PART#	382686	PROCESS TEMP MAINTENANCE	150ºF/65ºC
AGENCY APPROVAL	ATEX, IECEX, FM, UL, CSA	MAXIMUM CONT TEMP, POWER OFF	185ºF/85ºC
VOLTS	208-277V	WATTS/FT	3W/FT
CABLE CONSTRUCTION	Twin 16 AWG Copper Buss Wire	HEATING CABLE LENGTH	Sold per Linear Foot, 1FT =1QTY
COLOR	Metallic	CONDUCTOR MATERIAL	Copper
MINIMUM BEND RADIUS	1.125in / 28.575mm

Applications

• Self-Regulating, Energy Efficient
• For Use on Metallic Pipes Only
• Industrial Process Maintenance
• Industrial Freeze Protection Application
• Freeze Protection of Fire Protection System Piping

FEATURES

• Energy efficient, self-regulating SRL uses less energy when less heat is required.

• Easy to install, SRL can be cut to any length (up to max. circuit length) in the field.

• Field splices can be performed easily in minutes with no scrap or wasted cold sections.

• With lower installed cost than steam tracing, SRL features less maintenance expense and downtime.

• SRL can be overlapped without burnout, which simplifies heat tracing of in-line process equipment such as valves, elbows and pumps. Because SRL is self-regulating, over-temperature conditions are minimized.

• Chromalox termination, splice, tee and end seal kits reduce installation time.

CONSTRUCTIONS

• Twin 16 AWG Copper Buss Wire - Provide reliable electrical current capability


• Semiconductive Polymer Core Matrix - "Self-Regulating" competent of cable, its electrical resistance varies with temperature. As process temperature drops, the core's heat output increases; as process temperature rises, the heat output decreases


• High Temperature Fluoropolymer Jacket - Flame retardant, electrically insulates the matrix and provides corrosion resistance.


• Metallic Braid - Provides additional mechanical protection in any environment and a positive ground path


• High Temperature Fluoropolymer Overjacket (optional) - Corrosion resistant, flame retardant overjacket is highly effective in hostile, aqueous and chemically active environments. It also protects against abrasion and impact damage

WARNING - A ground fault protection device is required by NEC to minimize the danger of fire if the heating cable is damaged or improperly installed. A minimum trip level of 30mA is recommended to minimize nuisance tripping

Approvals:

Factory Mutual (FM) Approved, UL Listed, and CSA certified for ordinary areas. UL Listed for freeze protection or fire protection system piping. ATEX, IECEx, FM, and CSA Approved for hazardous (classified) areas when used with U Series HL, DL, and EL accessories.

CSA and FM Approved:

• Class I, Div. 1 & 2, Groups A, B, C, D (gases vapors)


• Class II, Div. 1 & 2, Groups E, F,G (combustible dust)


• Class III, Div. 2 (easily ignitable fibers and filings)


• 3 Watt Rated T6 Temperature Class


• 5 and 8 Watt Rated T5 Temperature Class


• 10 Watt Rated T4A Temperature Class

ATEX Approved:

• CE 0359 IIG EX e IIC T Gb Ta -60ºC to 195ºC

IECEx Approved:

• ITS 07.0018X EX e IIC T5 Gb Ta -60ºC to 95ºC